Small Hot Asphalt Mix Plant

The small hot asphalt mix plant construction company pay attention to the safety of the machine and the supply of related materials during the operation. The operator must have a sense of responsibility and strive to maintain the normal operation of the machine. When checking the failure of the weighing system, we should use troubleshooting methods to minimize the root cause of the problem. Doing a good job of hot mix asphalt plant equipment maintenance can avoid unnecessary equipment accidents, reduce maintenance time and equipment operation rate, extend the service life of parts, and help plan maintenance work.

The main way to reduce small hot asphalt mix plant equipment wear and tear is the manufacturing quality of equipment and parts, strengthen planned maintenance to reduce or eliminate accidental wear and repair, and ensure the quality of repairs. Especially the matching tolerances and accuracy of important parts should meet the technical requirements. Attach importance to maintenance work, do a good job in equipment technical transformation, and use new technologies to improve monitoring, alarm, and control.

Daily maintenance of hot mix asphalt plant equipment is the basic responsibility of job operators. The main content can be summarized, "clean, lubricate, tighten, and prevent leakage". The so-called cleaning refers to the frequent scrubbing of the machine itself, the "four nos" around the machine, the tools and workpieces should be placed neatly, and the rest room should be clean. The so-called lubrication means to check the lubrication of the lubricated parts in time, add oil and change the oil according to the specified time, do not add lubricating oil that does not meet the quality requirements, keep the refueling equipment clean, and keep the lubricating grease ready to use, keep the oil mark, oil line and clean oil path is unblocked. The so-called tightening refers to the loosening and movement of small hot asphalt mix plant machine parts caused by the operation of the machine parts, which causes vibration and heat. The position of the screw must be adjusted in time to restore normal operation.