Kapasitas Produksi Asphalt Mixing Plant

The kapasitas produksi asphalt mixing plant is about 40-400 ton per hour, at the same time, there are methods to improve the capacity of amp. The burner is the key component of asphalt mixing equipment, therefore, to improve the asphalt mixing plant production capacity, we should make sure that the burner have high working efficiency, so we must pay attention to the maintenance of the burner of the asphalt mixing plant.
 

To improve the kapasitas produksi asphalt mixing plant, the maintenance of the asphalt mixing plant must first be improved to ensure the normal operation of the mixing plant, and to maximize the output and quality. Asphalt mixing plant is one of the equipment that is prone to failure during construction. Daily equipment maintenance should be paid attention to to improve equipment utilization and production efficiency. The first is the maintenance of the burner tank body. The burner body is seriously worn during the operation of the asphalt mixing plant. In the daily maintenance, if it is found that the lining of the tank body, the blade mixing arm, and the material door seal are worn, if the wear is light, timely adjustment is required, and if the wear is serious, it needs to be replaced directly.
 

Secondly, the maintenance and adjustment of the hoist motor. The braking torque of the burner is controlled and adjusted by the large nut on the back seat of the motor, so pay special attention to the use of the nut when using it, and follow the corresponding procedures according to the actual situation. Then, the maintenance of the loading rack and support and the asphalt burner to improve kapasitas produksi asphalt mixing plant. Attention should be paid to the maintenance of the contact part of the feeding rack and the roller. Grease should be applied frequently to the inside and outside of the groove to reduce the resistance during operation and ensure the feeding speed is normal. Secondly, proper lubrication can effectively reduce wear and tear. Thereby reducing costs.