Generally, there are two types of kapasitas asphalt mixing plant 60 ton equipment: batch type and continuous type. The continuous process is simple and the asphalt mixing plant equipment is simplified. However, the intermittent forced asphalt mixing plant equipment, due to the secondary screening of the aggregate, the various components are measured in batches, and the forced mixing can reliably ensure the gradation, and the measurement of powder and asphalt can also reach a very high precision. So the prepared asphalt mixture is of good quality and can meet various construction requirements.
The control system of kapasitas asphalt mixing plant 60 ton relies on the signals detected by each sensor to monitor important parameters such as material ratio, asphalt content, and mixture temperature in real time to ensure that the quality of the mixture produced by asphalt mixing plant 60 ton per hour can meet the requirements of users. In the entire process flow, the electronic control system is also equipped with interlocking protection devices to protect the asphalt mixing plant equipment from accidental mechanical accidents.
It should be noted that the volume measurement of the cold aggregate through the belt feeder is the expected amount, and the measurement of the sieved hot aggregate, powder and hot asphalt is the measurement. Because of the secondary metering of kapasitas asphalt mixing plant 60 ton, it can ensure the gradation of the mixture, and the precision of the ratio of aggregate, powder and asphalt is relatively high. At present, the static measurement accuracy of aggregates and powders does not exceed ±0.5%, and the static measurement accuracy of asphalt does not exceed ±0.25%. Because it is intermittent mixing, it is also very convenient to change the mixing ratio of the mixture, and the formula can be changed or replaced without stopping the machine.
Copyright @2023 Haomei Machinery Company Inc. all rights reserved. Site Index Product Index Technical Support: HAOMEI