In the use of machinery is bound to cause mechanical failures in all aspects, and how these issues should be solved? Today in reversing valve failure of asphalt mixing plant, for example, tell you about troubleshooting methods of road construction machinery of asphalt mixing plant.

We can see that in the long-term practice of using asphalt mixing station valve failure: valve cannot reverse or reversing slow, gas leaks, and solenoid pilot valves is faulty.

(1) easy to occur after prolonged use, the valve spool seals wear, valve stems and valve seat damage, leading to gas leakage in valves, valve movement is slow or doesn't reverse faults. At this point, you should replace the sealing ring, valve stems and valve seat or valve replacement.

(2) the reversing valve cannot reverse, or reverse slow, usually due to poor lubrication, spring is stuck or damaged, oil or impurities stuck sliding parts and other causes. For this, you should check the Lubricator is functioning properly; the viscosity of the lubricant is appropriate. If necessary, you should replace the oil, clean the sliding parts of the valve, or replace the spring and valve.

(3) if the solenoid pilot valves for inlet and outlet holes clogged with sludge and other debris, closed is not strict, active cores were jammed, circuit failure, may cause the valve to normal direction. Three situations should be cleaned before the pilot valve and oil and impurities of the active core. Circuit fault generally can be divided into control circuit fault and solenoid failure categories. Check the circuit before the failure should be reversing valve hand knobs to turn a few, see if the rated pressure of the reversing valve in normal direction, if normal commutation, is a circuit fault.